Vertical Veneer Drying Machine

Vertical Veneer Drying Machine 

A vertical veneer drying machine is the main equipment in the production of plywood.  It is composed of four parts, which are divided into Feeding area, Heating area, Cooling area, and Discharging area.  The vertical tunnel-type core veneer dryer is mainly used for drying core plate, partial surface, and bottom plate.  The core veneer dryer has high efficiency, low energy consumption, and better meets the production process of the product.  The dryer is specially designed for the core veneer at a lower cost.  Low professional requirements for workers.  This type of dryer can be used for veneers with low flatness requirements.  This equipment requires 2 workers per shift.  The heat source is a hot air stove 900,000 kcal.  The length of our veneer dryer needs to be determined according to your output.  We can design the veneer dryer as per the customer`s project requirement.  It is suitable for the production process of cutting first and then drying, especially for the drying of thick veneers.

Our Advantages of Vertical Veneer Drying Machine 

1. The drying cost is low. The drying cost of this vertical dryer is less than $8/M³, which is 30-60% of the drying cost of other dryers;

2. The machine cost is low. Our company has reduced the production loss of raw and auxiliary materials and improved the working efficiency through the standardization and modular production of vertical dryer parts.

3. The drying output is high, and the vertical plywood method increases the loading capacity of the veneer, which is 30-80% higher than that of other dryers;

4. This equipment needs to be assembled on the customer's factory site, so this equipment can be installed according to the customer's specific location requirements.

Product Parameters of Vertical Core Veneer Dryer

Customer Case

Certification

Factory