Plywood Face Veneer Drying Machine
Plywood face veneer drying machine is used for drying sliced or peeled veneer in the veneer production line. The veneer mesh drying machine consists of in feeding, drying chamber, cooling chamber, and discharging. The mesh dryer size is customized according to the production capacity, process, and space requirement in order to improve productivity with the lowest investment.
Plywood Face Veneer Drying Machine
Mesh belt net dryer consists of several independent unit sections. Mesh belt dryer is a closed-belt dryer. Its feature is that only the feed end and the discharge end are open, and the others are closed. Hot air flows through the equipment and the heat loss is low, which can save a lot of energy. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor. The structure is simple, easy to install, can run for a long time, can enter the interior of the box for maintenance when the fault occurs, and the maintenance is convenient.
The plywood face veneer drying machine uses the upper and lower mesh belts to transport the veneer. The lower mesh belt is mainly used for support and transmission, and the upper mesh belt is used for compaction. Its function is to give proper compaction force during the veneer drying process. To prevent the veneer from deforming during the drying process. The mesh belt of the mesh belt dryer is galvanized flat iron wire, which is spirally surrounded by left and right, and a metal mesh belt composed of a 3 mm diameter galvanized round iron wire is introduced in the middle.
Product Parameter of Plywood Face Veneer Drying Machine
Model No. | Shine-20 |
Working Width | 3000mm |
Layers | 2 deck |
Heating Section | 9 sections×2000mm＝18000mm |
Cooling Section | 1 section×2000mm＝2000mm |
Veneer feeding section | 1500mm |
Veneer discharge section | 1500mm |
Total Power | 47KW |
Heating Medium | Steam or thermal oil |
Drying temperature | 150-180℃ |
Thermal energy consumption | 120×104 Kcal Steam 2-3T |
Drying Thickness | 0.2-4mm |
Final moisture content | 8-12% |
Drying capacity(m³/h) | 1-1.5 |
Overall Dimension | L 23m(feeding1.5m+drying and cooling 21m+discharge 1.5m)×W 4.36m×H 2.2m |
Container | 1X40’HQ+1X20’HQ |
Certification
Customer Case
The Factory
Our Services
Pre-sale services:
1) Provide the free consultation of all veneer production line
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory.
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
After sale services:
1) 24 hours online service.
2) Provide the VIDEO with Install and debug the equipment.
3) Provide technical exchanging（Technical phone：+8615806625431）Door to door service is possible.
