Face Veneer Drying
1. Drying Slicer veneer, log lathe/half round slicer veneer, rotary peeling face veneer.
2. Reliable operation, longer service life, energy efficiency, and unmatched performance.
3. Mesh belt dryer is a closed-belt dryer. Its feature is that only the feed end and the discharge end are open, and the others are closed. Hot air flows through the equipment and the heat loss is low, which can save a lot of energy.
4. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.
5. The structure is simple, easy to install, can run for a long time, can enter the interior of the box for maintenance when the fault occurs, and the maintenance is convenient.
Face Veneer Drying
The continuous face veneer drying is one of the main types of equipment in veneer and plywood production and can be used for continuous drying operation. It is used for drying veneers with rotary cutting and slicer and it is designed specially to dry the very thin face veneer typically at 0.2-1.2mm thickness. The mesh dryer is composed of four parts, which are divided into the feeding area, heating area, cooling area, and discharging area. The wood veneer drying machine has features of high efficiency, low energy consumption, and better meets the production process of the product.
Features of Face Veneer Drying
1. The veneer after drying has uniform moisture content and is flat without buckle or end waviness.
2. The veneer after drying is free of splits and the surface is in good condition for gluing.
3. Shrinkage and casehardening are kept to a minimum and collapse and honeycomb are avoided.
4. The veneer dryer is equipped with an automatic control system with the merits of saving labor costs, high drying efficiency, easy operation, and low failure rate. Main electrical appliances are selected international brands.
5. Less maintenance is required for this type of Dryer with no Veneer Jamming leading to lesser Downtime.
6. We have a professional R&D team that can make customized designs according to customers’ special requirements.
7. After-sales service: remote operation is available on request, Network interactive services, regular customer visits, the skilled service team can solve the failure at the first time.
Main Technical Specifications of Face Veneer Drying
Model No. | Shine-20 |
Working Width | 3000mm |
Layers | 1 deck |
Heating Section | 6 sections X 3000mm=18000mm |
Cooling Section | 1 section X 2000mm=2000mm |
Total Power | 31.7KW |
Transmission Motor | 5.5kw X 1 pc=5.5kw frequency control |
Hot Air Fan | 4kw X 6 pcs=24kw |
Cold Air Fan | 2.2kw X 1pc=2.2kw |
Radiator | 6 units L 2000mm X W 300mm X H 900mm |
Transmission Speed | 1-30m/min |
Heating Medium | Steam or Thermal Oil |
Drying Temperature | 150-180℃ |
Thermal Energy Consumption | 60X104 Kcal Steam 1 T |
Drying Thickness | 0.2-1.2mm |
Initial Moisture Content | 60-80% |
Final Moisture Content | about 10% |
Drying Capacity | 0.5-1M3/h |
Overall Dimension | L 23m(infeed 1.5m+drying and cooling 20m+discharge 1.5m) X W 4.36m X H 2.2m |
Container and Weight | 1 X 40' HQ around 23000Kgs |
Customer Visiting
Factory
Our Services
Pre-sale services:
1) Provide the free consultation of all veneer production line
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory.
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
After sale services:
1) 24 hours online service.
2) Provide the VIDEO with Install and debug the equipment.
3) Provide technical exchanging（Technical phone：+8615806625431）Door to door service is possible.
