Plywood Veneer Drying Machine
The moisture content of the veneer dried by the shine veneer dryer is uniform, smooth, without wrinkles or end ripples, without cracks, and the surface is in good glued state.
Type: Biomass Veneer Dryer
Working Width: 4.5m
Veneer thickness: 0.8-8mm
Heating Area Length: 36m
Drying capacity (m³/day) : 168-192
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
Plywood Veneer Drying Machine
The hot air fan and cold air fan of the Shine veneer dryer adopt the latest axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the user's later operating costs.
Shine biomass veneer dryer is widely valued for the lowest operation cost, high drying capacity, and energy-efficient as well as high-quality veneer output. It is meant for drying the Core Veneer & Face Veneer and is the Dryer of choice all over the country as well as abroad.
The roller veneer dryer adopts advanced heat exchange structure, which has high heat exchange efficiency and small heat loss. The core plate dryer can be heated by steam boiler, thermal oil heater or biomass burner to save fuel cost to the greatest extent. The composite drying cost of a drum dryer heated by a biomass burner is about 6-12$/m3, including labor costs, fuel costs and electricity.
Advantage of Plywood Veneer Drying Machine
1、Shine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect.
2、Shine heat exchanger adopts step by step heat transfer, and the specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer.
3、We have a professional R&D team that can design different models according to customer’s special requirement. Perfect after-sale service system can supply 24h online service, remote operation is available on request, regular customer visits, sufficient spare parts supply in time.
Product Parameters of Plywood Veneer Drying Machine
Model No | GTH45-40 |
Working Width | 4.5m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 36m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 168-192 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW×2（18pc） |
Traction motor | Power: 7.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 11KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 228.5KW |
Actual electricity consumption | About 189.2kwh per hour |
Overall Dimension(L*W*H) | 51m×13m×3.5m |
Customer Case Video of Plywood Veneer Drying Machine
Certification
The customer evaluation
Our Factory
Our Services
Pre-sale services:
1) Provide the free consultation of all plywood veneer dryer
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging（Technical phone：++8615806625431）Door to door service is possible
