Roller Veneer Drying Machine
The size of roller veneer drying machine can be customized according to production capacity, process and space.（Both the front and rear feeding veneer and receiving veneer can be customized according to customer needs）. The electricity consumption of the shine veneer dryer has been reduced by 35%, and you can visit the case site nearby.
Roller Veneer Drying Machine
Roller Veneer Drying Machine is a new generation wood veneer drying machine.By adopting latest international pressure contact veneer drying technology, Shine roller veneer dryer has the advantage of high veneer drying capacity,lowest operate cost,energy efficiency and high quality dried veneer.The veneer after drying has the uniform moisture content, flat,no waviness and shrinkage is kept to a minimum.The surface is in good condition for gluing for plywood process.
4 deck roller veneer drying machine is our newly developed product to meet high capacity requirements of customers,which has the salient features of higher drying capacity.The rollers use φ102 steel special shaft tube.The bearings of 4 deck veneer dryer are featured high temperature 500 degree Celsius resistance and low temperature -20 degree Celsius resistance which no need injecting oil and easy maintenance in the daily operation.A unique heat exchange structure makes the equipment run efficiently and greatly improves drying output.Biomass burner is our patented product,which can burn waste wood (rotary cutting veneer,waste bark,and waste veneer) directly,heat air,and deliver to the dryer directly without heat loss.The fuel cost is much lower than thermal oil,steam gas,electricity,and others.The composite cost is only about $10/m³.
Product Parameter of Roller Veneer Drying Machine
Model No | GTH45-34 |
Working Width | 4.5m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 30m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 150-160 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（30pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 11KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 196.5KW |
Actual electricity consumption | About 138kwh per hour |
Overall Dimension(L*W*H) | 46m×12m×3.5m |
Certification
The installation
Exhibition and Customer Visiting
Factory
Packaging & Shipping
