Plywood Veneer Dryer Machine
Type: Plywood Veneer Dryer Machine
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 48m
Drying capacity (m³/day) : 150-160
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
Plywood Veneer Dryer Machine
This 4 deck automatic plywood veneer dryer machine was purchased by our Romanian customer. Now it has been installed and is waiting for trial operation. It is equipped with automatic board winding and semi-automatic board winding devices, which saves labor cost. The customer is very satisfied with the equipment. Later expansion of production will continue to purchase our veneer dryer.
Customers are also worried about the product before purchase, until they go to our Latvian customer's factory to see the actual operation of our equipment, and are very satisfied with the performance and quality of the veneer dryer, and the customer immediately decided to purchase our roller dryer after going back.
The continuous roller dryer uses a new axial flow fan to reduce the power of the whole machine, save energy and power, and the maximum output can reach more than 300 m³/day, according to your actual situation, to provide you with a more suitable for your veneer drying solution.
Product Parameters of Plywood Veneer Dryer Machine
Model No | GTH30-52 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 48m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/h) | 7-8 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（48pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 284.5KW |
Actual electricity consumption | About 200kwh per hour |
Overall Dimension(L*W*H) | 63m×11m×3.5m |
The Factory
Packaging & Shipping
