Veneer Core Dryer Machine

1.Customizable (customized one-stop service)

2.The roller uses a φ89mm special shaft tube, which is corrosion-resistant and rust-proof

3.Stable equipment and low failure rate

4.Has been exported to Europe, South America, Asia, Africa and other regions, and can be viewed in real time

5.The veneer is flat and wrinkle-free after drying

6.Diverse heat source options


  Contact Now
Product Details

Veneer dryers offer high efficiency at a lower drying cost. Our veneer dryer feature high production efficiency, energy saving, and good drying effects. The 4-deck veneer dryer can be equipped with an automatic feeding device to feed the veneer into the dryer, greatly saving labor costs. The dried veneer has a uniform moisture content, is flat without snaps or end waves. Shine veneer dryers require less maintenance, veneer does not get stuck, and reduces downtime. Shine biomass veneer dryers can meet users' special requirements and achieve ideal drying effects.


veneer dryer.jpg


Advantages of veneer dryer


1、The hot air fan and cold air fan of the dryer adopt the latest axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the later operation cost.

2、The Shine heat exchanger adopts step-by-step heat exchange. The specifications of each heat exchanger are different, and the hot air inside can be evenly distributed to the single board. After drying, the moisture content of the veneer is uniform, smooth, without wrinkles or end ripples, without cracks, and the surface is in good glued state.

3、The roller veneer dryer adopts frequency conversion speed regulation, which can adjust the feeding speed according to your veneer thickness and moisture content, so as to achieve the ideal drying effect.

4、The fuel source can be waste wood or bark after peeling, which can greatly reduce fuel costs for users.

5、Perfect after-sales service system, 24-hour online service, remote operation, so that customers can rest assured after installation. Regular follow-up services for old customers, sufficient and timely supply of spare parts.


veneer drying machine.jpg


Product Parameters of Veneer Dryers


Model No

GTH30-36

Working Width

3.0m

Deck

4

Roller material

Q235B, φ102 special shaft tube

Heating area length

32m

Cooling area length

4m

Veneer thickness and size

0.8-8mm

Veneer water moisture

Fresh veneer to about 8-10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/day)

110

Veneer transport speed

5-22m/min,16A chain

Hot air blower

Power: 4KW(32pc)

Traction motor

Power: 5.5KW,frequency control(4pc)

Cold air blower

Power: 4KW(4pc)

Air intake fan

Power: 15KW(2pc)

10 ton biomass burner

Power: 16.5KW

Total power

212.5KW

Actual electricity consumption

About 149kwh per hour


veneer dryer.jpg


Exhibition and Customer Visiting


Exhibition and.jpg


Customer Visiting.jpg


The customer evaluation


The customer evaluation.jpg


The Factory


The Factory.jpg


Packaging & Shipping


Packaging & Shipping.jpg

Send your message to us
x