Plywood Core Dryer Machine
Plywood core dryer machine can supply high efficiency with lowest drying cost. Our veneer drying machine has advantages of high productivity, energy efficiency and perfect drying effect. veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly.
Plywood Core Dryer Machine
The plywood core dryer machine is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption.
Core dryer machine has an advanced heat exchanging structure with features of high heat exchange efficiency and low heat loss. The core veneer dryer can be heated by a steam boiler, thermal oil heater, or biomass burner which can save the fuel cost the most. The composite drying cost using biomass burner heated roller dryer is about only USD 10 per cubic meter including the labor cost, fuel cost, and electricity.
Product Parameter of Plywood Core Dryer Machine
Model No | GTH30-36 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness and size | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 110 |
Veneer transport speed | 5-22m/min,16A chain |
Hot air blower | Power: 4KW(32pc) |
Traction motor | Power: 5.5KW,frequency control(4pc) |
Cold air blower | Power: 4KW(4pc) |
Air intake fan | Power: 15KW(2pc) |
10 ton biomass burner | Power: 16.5KW |
Total power | 221.5KW |
Actual electricity consumption | About 149kwh per hour |
Overall Dimension(L*W*H) | 47m×11m×3.5m |
Exhibition and Customer Visiting
Certification
The Factory
Packaging & Shipping