Veneer Continuous Dryer

1.Professional factory production

2.Customizable (customized one-stop service)

3.Low comprehensive operating cost, the cost of one cubic board is 6-12$/m3

4.Convenient installation (installation can be completed in 25-30 days)

5.Imported accessories, using thicker high-quality steel


  Contact Now
Product Details

Veneer Continuous Dryer


The veneer roller dryer machine is especially for drying core veneer thickness 0.6-8mm. Roller veneer drying machine has an advanced heat exchanging structure with features of high heat exchange efficiency and low heat loss. The core veneer dryer can be heated by a steam boiler, thermal oil heater, or biomass burner which can save the fuel cost the most. 

The working width and working length of the wood veneer drying machine can be customized according to the specific drying capacity requirement needed by the different customers.


Veneer Continuous Dryer.jpg


Advantages of Veneer Dryer Machine


1.  The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.

2.  The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content.  Simple operation and low failure rate.

3.  The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.

4.  After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.

5.  Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.

6.  We have a professional R&D team which can design different models according to customer’s special requirement.

7.  The perfect after-sale service team can supply 24 hours online service.


Veneer Continuous Dryer.jpg


Product Parameters of Veneer Continuous Dryer


Model No

GTH30-52

Working Width

3m

Deck

2

Roller material

Q235B, φ89 steel pipe

Heating area length

48m

Cooling area length

4m

Veneer thickness

0.8-8mm  

Veneer water moisture

Fresh veneer to about 10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/24h)

75-85cbm  

Veneer transport speed

5-22m/min,16A chain

Hot air blower

Power:5.5KW(12pc)

Traction motor

Power: 7.5KW,frequency control(2pc)

Cold air blower

Power: 5.5KW(1pc)

Air intake fan

Power : 11KW(2pc)

6 ton biomass burner

Power: 16.5KW

Total power

125KW

Actual electricity consumption

About 88kwh per hour 


Customer Case


1722405449600894.jpg


The Factory


The Factory.jpg


Packaging & Shipping


Packaging & Shipping.jpg

Send your message to us
x