Continuous Veneer Drying Machine
Continuous veneer drying machine has the advantages of simple operation, safety and practicality, stable operation and easy maintenance.Integrated design of the veneer dryer can greatly improve the utilization rate of the space occupied. The veneer enterprises can do the drying all the times ,which can avoid the wet veneer deterioration due to climate, improve the drying effect.
Continuous Veneer Drying Machine
Roller veneer drying Machine is available in different models as per the production requirement by addition & deduction of different section or decks. it has the characteristics of high efficiency, energy saving and good dry quality. Veneer drying machine is suitable for peeling core of drying. In order to achieve the best drying efficiency of the injector roller veneer dryer, the machine's shell is insulated by a shell thickness of 75 mm-100 mm, so as to achieve the heat and no air loss within the machine.
Product Parameters of Continuous Veneer Drying Machine
Model No | GTH30-44 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 40m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 60-70cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（10pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
6 ton biomass burner | Power: 16.5KW |
Total power | 174.5KW |
Actual electricity consumption | About 120kwh per hour |
Covered Space of the whole machine | 50M X 9M X 3M |
Exhibition and Customer Visiting
The Factory
Packaging & Shipping
