Wood Veneer Machine
The wood veneer machine is mainly used for the drying of veneers. It is an economical method to reduce the moisture content of the veneer to minimize the loss of the plate and meet the veneer requirements of the drying veneer process.the veneer after drying is flat and smooth, the moisture can be dried to 0. Shine veneer dryer is equipped with an automatic control system with the merits of saving labor cost, easy operation, and low failure rate. A continuous automatic feeding system makes drying efficiency very high and reduces labor cost greatly.
Wood Veneer Machine
The wood veneer machine is mainly used for the drying of veneers for making decorative plywood, film-faced plywood or construction plywood, shuttering plywood and baseboard for containers. It is an economical method to reduce the moisture content of the veneer to minimize the loss of the plate and meet the veneer requirements of the drying veneer process. This environmental veneer dryer effectively solves difficult issues such as hard to dry, long drying cycle, uneven drying, easy to crack, deformation and low yield, and other problems during the drying process. Compared to other types of veneer dryers, the best advantage of the waste wood veneer drying machine is that the fuel cost is low and can make full use of the waste wood of the peeling machine, which can also save space for the users.
Advantages of Wood Veneer Machine
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
4. We have a professional R&D team that can design different models according to customers' special requirements.
5. The perfect after-sale service team can supply 24 hours online service.
Product Parameter of Wood Veneer Machine
Model No | GTH30-32 |
Working Width | 3m |
Deck | 1 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 28m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200℃ adjustable. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | About 20-25m³/day |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（7pc） |
Traction motor | Power: 5.5KW，frequency control（1pc） |
Cold air blower | Power:5.5KW（1pc） |
Air intake fan | Power: 7.5KW（2pc） |
2ton biomass burner | Power: 15KW |
Total power | 79.5KW |
Actual electricity consumption | About 56kwh per hour |
Space covered about | 36m× 9m×2m |
Certification
Exhibition and Customer Visiting
Factory
Packaging & Shipping
