Conveyor Veneer Dryer
Shine conveyor veneer dryer has the features of high productivity, energy efficiency, lowest drying cost and perfect drying effect. The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing.
Type: Roller Veneer Dryer Machine
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 36m
Drying capacity (m³/day) : 30
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
Conveyor Veneer Dryer
Conveyor veneer dryer is applicable for core veneers in plywood production. Veneer drying thickness ranges from 0.8~8mm. Hundreds of drying units consisting of 2 rollers and 2 jetting tubes in up and down positions provide effective & high-quality drying results. The planer (rotary) cutting veneer is fed into the infeed of the jet roller type veneer dryer, and through the relative rotation of several pairs of upper and lower rollers located inside the wood veneer drying machines, the planning veneer moves forward in a predetermined direction, and in the course of the veneer travel, the hot wind of 140-200 degrees Celsius is sprayed vertically to the face and back surfaces of the veneer by the nozzle located between the two pairs of rollers with the wind speed of V=1.5M/S. Under the control of the electronic control system of the core veneer dryer, the optimal travel speed is adjusted to achieve the best drying effect. And the uneven veneer, after the relative rotation of the upper and lower rollers, can reach the effect of ironing the veneer inside the wood veneer drying machine.
Features of Conveyor Veneer Dryer
1.The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2.The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3.The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
4.After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
5.Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6.We have a professional R&D team that can design different models according to customers' special requirements.
7.The perfect after-sale service team can supply 24 hours online service.
Product Parameter of Conveyor Veneer Dryer
Model No | GTH30-36 |
Working Width | 3m |
Deck | 1 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200℃ adjustable. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | About 25-30m³/day |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（8pc） |
Traction motor | Power: 5.5KW，frequency control（1pc） |
Cold air blower | Power:5.5KW（1pc） |
Air intake fan | Power: 7.5KW（2pc） |
2ton biomass burner | Power: 15KW |
Total power | 85KW |
Actual electricity consumption | About 60kwh per hour |
Space covered about | 40m× 9m×2m |
Exhibition and Customer Visiting
Certification
The Factory
Packaging & Shipping
