< >

Wood Veneer Drying

The electricity consumption of the shine veneer dryer has been reduced by 35%, and you can visit the case site nearby.

Type: Roller Veneer Dryer

Working Width: 3m

Veneer thickness: 0.8-8mm

Heating Area Length: 48m

Drying capacity (m³/day) : 80

Heat Source: Biomass Burner (Other options available)

24 hours online service（WhatsApp：15806625431）

Contact Now

Product Details

Wood Veneer Drying

Shine wood veneer drying provides you with a one-stop solution. The dried veneer has uniform moisture content, is flat, has no wrinkles or end ripples, no cracks, and has a good surface glued state. The power of the whole machine is reduced by 35%, and the power consumption is greatly reduced compared with the traditional veneer dryer.

Wood Veneer Drying

Advantages of Wood Veneer Drying

1、The hot air fan and cold air fan of the dryer adopt the latest axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the later operation cost.

2、The Shine heat exchanger adopts step-by-step heat exchange. The specifications of each heat exchanger are different, and the hot air inside can be evenly distributed to the single board. After drying, the moisture content of the veneer is uniform, smooth, without wrinkles or end ripples, without cracks, and the surface is in good glued state.

3、The roller veneer dryer adopts frequency conversion speed regulation, which can adjust the feeding speed according to your veneer thickness and moisture content, so as to achieve the ideal drying effect.

4、The fuel source can be waste wood or bark after peeling, which can greatly reduce fuel costs for users.

5、Perfect after-sales service system, 24-hour online service, remote operation, so that customers can rest assured after installation. Regular follow-up services for old customers, sufficient and timely supply of spare parts.

Wood Veneer Drying

Product Parameter of Wood Veneer Drying

Model No	GTH30-52
Working Width	3m
Deck	2
Roller material	Q235B, φ89 steel pipe
Heating area length	48m
Cooling area length	4m
Veneer thickness	0.8-8mm
Veneer water moisture	Fresh veneer to about 10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/24h)	80cbm
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power:5.5KW（12pc）
Traction motor	Power: 7.5KW，frequency control（2pc）
Cold air blower	Power: 5.5KW（1pc）
Air intake fan	Power : 11KW（2pc）
6 ton biomass burner	Power: 16.5KW
Total power	125KW
Actual electricity consumption	About 87.5kwh per hour
Covered Space of the whole machine	58M X 9M X 3M