News Center
The newly upgraded plywood dryer machine mainly has the following features:1. Heat exchange systemShine heat exchangers adopt step-by-step heat exchange. The specifications of the heat exchangers in each section are different. The hot air in the heat exchanger can be evenly distributed to the…
2023/10/11 15:12
The roller veneer dryer can dry various types of veneers, including softwood, hardwood, bamboo, etc. (such as some common wood types such as eucalyptus, birch, poplar, pine, spruce, oak, maple, Walnut, teak, etc.). It should be noted that different types of wood have different fiber structures,…
2023/09/28 15:47
Recently, the veneer dryer purchased by our Russian customer has been produced and is ready for shipment. Our engineers will then go to the customer's factory to guide the installation. This equipment is a double-layer 36-meter-long burner with a 6-ton burner. It adopts new technology and reduces…
2023/09/21 09:27
Veneer dryers generally need to make preparations before the official test run to ensure that the test run can proceed normally. The preparation work required before the test run mainly includes the following points:First, warm the furnace: The high-temperature-resistant material poured into the…
2023/09/13 09:50
In the face of rising labor costs, looking for highly automated solutions has become a customer demand, are you also looking for highly automated solutions? Shine fully automatic intelligent drying production line adopts fully automatic control and frequency conversion control system to…
2023/09/08 14:09
Are you worried that the output of the dryer will not be reached? Or has purchased the results did not meet the expected output? The reasons mainly include the following aspects,First: the type of wood that needs to be dried, some special wood will take longer to dry.Second: Dry the initial…
2023/07/27 13:40
Many people may encounter the board stuck problem in the process of using the veneer dryer. In order to avoid this problem, the following suggestions can be taken:First of all, keep the equipment clean, clean the dust collector and exhaust pipes, and minimize the accumulation of dust; secondly, do…
2023/07/19 14:30
During the drying process, the volume of the wood will shrink due to the loss of internal moisture, so the wood will shrink after drying. This is because after the moisture in the wood evaporates, the fibers in the wood become more compact, resulting in a reduction in the volume of the wood. In…
2023/07/11 13:41
Many people may encounter cardboard problems during the use of dryers. In order to avoid this problem, the following suggestions can be taken:First of all, keep the equipment clean, clean the dust collector and exhaust pipes, and minimize the accumulation of dust; secondly, do a good job of…
2023/07/06 09:47
Do not miss out on this exclusive event in the woodworking and furniture manufacturing industry. Join Shine Machinery to explore the latest innovations together, and unlock the new business opportunities!With Shine Machinery, to find a great potential. See you there！Be part of Shine Machinery at…
2023/06/29 10:11
Birch veneer is prone to mildew and blue or red spots after drying. Keeping these two points in mind can help you easily solve the mold problem. First, dry it to about 4-5 moisture, which is equivalent to zero moisture. There will be no mildew problem for 2-3 years. Secondly, it is ideal to place…
2023/06/01 10:50
African veneer bosses often ask me, why is the veneer that is baked in a dryer so damp? To answer this question, there are two main reasons:1. Water absorption of wood itselfWood has a certain range of moisture content, which is adjusted with changes in ambient temperature and humidity. Even after…
2023/05/25 09:38
