The 2 deck 56 m veneer dryer purchased by our Thai customer is being installed by our engineers. This equipment is equipped with a 10-ton biomass burner, with a width of 3.75 meters. It uses a new axial flow fan to save energy. Save electricity. If you want to see the case site, please contact us !
2024/03/12 14:54
The 2 deck 48 m veneer dryer and 6-ton burner purchased by our customers in Phechabun Province, Thailand, are being installed. Our engineers went to the customer's factory to guide the installation, and the engineers returned only after the equipment could be used normally. The customer used…
2024/03/07 09:46
The shine veneer dryer has the characteristics of large drying output, good effect, and easy maintenance. It has been unanimously recognized by customers and has been widely used. However, some customers always report that the efficiency of the wood chip drying equipment is not high. This is due to…
2024/03/05 09:46
It is estimated that in January 2024 Vietnam's exports of wood and wood products will reach US$1.4 billion, up 5% compared to December 2023 and up 75% compared to January 2023. In particular, the export of wood products is estimated at US$924 million, down 3% compared to December 2023 but up 87%…
2024/02/29 08:50
Many people don't know how to perform maintenance when using the dryer to better extend its service life. Today I will show you the daily maintenance of the veneer dryer.1. Clean the inside and outside of the dryer regularly to ensure good ventilation and smooth hot air flow.2. Check the…
2024/02/27 10:10
Faced with rising labor costs, finding highly automated solutions has become a customer demand. Are you also looking for highly automated solutions? Shine's fully automatic intelligent drying production line adopts fully automatic control and frequency conversion control systems. It automatically…
2024/02/22 11:06
Pine is considered one of the difficult woods to dry, primarily due to its woody structure and composition.1. Uneven density: The fibers of pine wood are relatively thin and soft, resulting in uneven density within the wood. This causes the wood to dry at an inconsistent rate and is prone to…
2024/02/20 11:28
As the Spring Festival approaches, Shine Intelligent Dryer would like to send New Year blessings to everyone in advance and wish everyone a Happy New Year! In the new year, may you be happy and healthy, may everything go well, may you have abundant financial resources, may all your wishes come true…
2024/02/02 08:53
As the main equipment for drying wood, the veneer dryer's drying speed will directly affect the quality and efficiency of drying veneers. Therefore, we must fully understand the factors that affect the drying speed in order to make it better. play a role.One of the main factors that affects the…
2024/01/25 09:29
This 2 deck 56-meter-wide 3.75-meter-wide roller veneer dryer was purchased by our Thai customer. It has been produced and ready for shipment. It is equipped with our biomass burner to save fuel costs. We will be sent to you when it is installed. Engineers go to the customer's factory to guide the…
2024/01/23 09:42
Veneer dryers generally need to make preparations before the official test run to ensure that the test run can proceed normally. The preparation work required before the test run mainly includes the following points:Warming furnace: The high-temperature-resistant material poured into the burner is…
2024/01/18 09:20
With the gradual cancellation of natural drying, many bosses are inspecting veneer dryers. If you want to see the case site, you can contact us at any time. Many customer case sites in South Africa, Myanmar, Romania, Guangdong, Yunnan, etc. are waiting for you to see!
2024/01/16 10:14
