< >

Wood Veneer Machinery

1.Professional factory production

2.Imported accessories, using thicker high-quality steel

3.Highly automated and efficient (fully automatic veneer feeding and receiving system)

4.The main electrical components are all well-known domestic and foreign brands

5.Stable equipment and low failure rate

Contact Now

Product Details

Wood Veneer Machinery

The veneer dryer is heated by thermal oil (other heat sources can be selected), equipped with a fully automatic veneer feeding and semi-automatic veneer collection system, saving labor, and the output is 2-3 times that of the original traditional dryer. It can be customized according to your output. The veneer dryer consists of a feed port, a drying area, a cooling area, and a discharge port. It is suitable for drying all kinds of veneers and veneers. It is easy to install (installation can be completed in 25-30 days). It has been exported to Europe, South America, Asia, Africa and other regions. You can watch the site in real time. If you want to know more about the machine (performance, detailed parameters, videos, etc.), please contact us!

Wood Veneer Machinery.jpg

Advantages of Veneer Dryer Machine

1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.

2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.

3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.

4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.

5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.

6. We have a professional R&D team which can design different models according to customer’s special requirement.

7. The perfect after-sale service team can supply 24 hours online service.

Wood Veneer Machinery.jpg

veneer dryer.jpg

Product Parameters of Wood Veneer Machinery

Model No	GTH30-52
Working Width	3.0m
Deck	4
Roller material	Q235B, φ102 special shaft tube
Heating area length	48m
Cooling area length	4m
Veneer thickness and size	0.8-8mm
Veneer water moisture	Fresh veneer to about 8-10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/h)	7-8
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power: 4KW（48pc）
Traction motor	Power: 5.5KW，frequency control（4pc）
Cold air blower	Power: 4KW（4pc）
Air intake fan	Power: 15KW（2pc）
10 ton biomass burner	Power: 16.5KW
Total power	284.5KW
Actual electricity consumption	About 200kwh per hour