< >

rotary veneer drying machine

The power of the veneer dryer is reduced by 38%, which saves energy and electricity. Different models and configurations can be customized according to the actual situation of the customer.

Type: Roller Veneer Dryer

Working Width: 3m

Veneer thickness: 0.8-8mm

Heating Area Length: 32m

Drying capacity (m³/day) : 110-120

Veneer Water Moisture: Fresh veneer to about 0-15%

Cost: 6-12$/m3 (Labor+Fuel+Electricity)

Heat Source: Biomass Burner (Other options available)

24 hours online service（WhatsApp：+8615806625431）

Contact Now

Product Details

Rotary Veneer Drying Machine

This 2 deck veneer dryer uses a thermal oil furnace for heating (other heat sources can be selected), equipped with a semi-automatic feeding and collecting systems, to dry all kinds of wood. The dried boards are flat and wrinkle-free. The output is 2.5m³ per hour. It has the characteristics of high productivity, high energy efficiency, low drying cost and good drying effect.

Veneer Drying Machine.jpg

Advantages of Veneer Drying Machine

1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.

2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.

3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.

4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.

5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.

6. We have a professional R&D team which can design different models according to customer’s special requirement.

7. The perfect after-sale service team can supply 24 hours online service.

Veneer Drying Machine.jpg

Product Parameters of Veneer Drying Machine

Model No	GTH30-44
Working Width	3m
Deck	2
Roller material	Q235B, φ89 steel pipe
Heating area length	40m
Cooling area length	4m
Veneer thickness	0.8-8mm
Veneer water moisture	Fresh veneer to about 10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/24h)	60-70cbm
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power:5.5KW（10pc）
Traction motor	Power: 7.5KW，frequency control（2pc）
Cold air blower	Power: 5.5KW（1pc）
Air intake fan	Power : 11KW（2pc）
6 ton biomass burner	Power: 16.5KW
Total power	114KW
Actual electricity consumption	About 80kwh per hour