Wood Veneer Dryer For Sale
1.Customizable (customized one-stop service)
2.The dryer output is 2-3 times that of the original traditional dryer
3.The roller uses a φ89mm special shaft tube, which is corrosion-resistant and rust-proof
4.Flexible local support (technology and maintenance)
5.Stable equipment and low failure rate
6.Has been exported to Europe, South America, Asia, Africa and other regions, and can be viewed in real time
The veneer dryer has low power consumption and good drying effect. It adopts frequency conversion control and can automatically adjust the speed and temperature. The veneer roller dryer allows automatic feeding device, which can greatly save labor costs.
The hot air fan and cold air fan of the Shine veneer dryer adopt the latest axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the user's later operating costs.
Advantages of Veneer Dryer Machine
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6. We have a professional R&D team which can design different models according to customer’s special requirement.
7. The perfect after-sale service team can supply 24 hours online service.
Product Parameters of Wood Veneer Dryer
Model No | GTH30-44 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 40m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 60-70cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（10pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
6 ton biomass burner | Power: 16.5KW |
Total power | 114KW |
Actual electricity consumption | About 80kwh per hour |
Exhibition and Customer Visiting
The Factory
Packaging & Shipping
