Veneer Sheet Dryer Machine
The shine veneer sheet dryer machine can be customized for you according to your actual situation. The newly upgraded dryer has reduced power and power consumption, saving electricity bills. Manual, semi-automatic and fully automatic configurations are available for you to choose from. Choose Shine to provide you with a full set of service solutions!
Type: Roller Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 48m
Drying capacity (m³/day) : 150-160
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
Veneer Sheet Dryer Machine
The newly upgraded veneer sheet dryer machine uses the latest axial flow fan, which reduces the power consumption of the entire equipment to a minimum, saving energy. Customized services based on the actual situation of customers can save costs while maximizing your production. No matter what size of veneer you produce, Shine can satisfy you.
The 4 deck veneer dryer adopts a high degree of automation (the degree of automation can be customized) to save labor. It adopts an advanced heat exchange structure, with high heat exchange efficiency and small heat loss. the veneer dryer can be heated by a steam boiler, thermal oil furnace or biomass burner. Shine provides you with not only products, but also high-quality one-stop service solutions. From factory planning to put into use, Shine can Provide you with relevant suggestions.
Product Parameters of Veneer Sheet Dryer Machine
Model No | GTH30-52 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 48m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/h) | 6.5 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（48pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 284.5KW |
Actual electricity consumption | About 200kwh per hour |
Overall Dimension(L*W*H) | 63m×11m×3.5m |
The Factory
Packaging & Shipping
