Industrial Wood Veneer Dryer
1.Professional factory production
2.Energy saving and power saving, using axial flow fans, the power of the whole machine is reduced by 38%
3.The veneer is flat and wrinkle-free after drying
4.The roller uses a φ89mm special shaft tube, which is corrosion-resistant and rust-proof
5. Low comprehensive operating cost, the cost of one cubic board is 6-12$/m3
Wood Veneer Dryer can automatically adjust the transmission speed and temperature according to the thickness and moisture content of different veneers to achieve the ideal drying effect. The biomass burner can directly burn various waste wood materials, which has the main characteristics of environmental protection, high efficiency and fuel saving. Compared with steam or thermal oil furnace dryers, the drying cost is greatly reduced. It realizes the use of local materials and turning waste into treasure. The automatic feeding device and the fully automatic board collection system not only improve the efficiency of veneer drying, but also maximize the savings in labor costs.
Advantages of Wood Veneer Dryer
1、The hot air fan and cold air fan of the dryer adopt the latest axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the later operation cost.
2、The Shine heat exchanger adopts step-by-step heat exchange. The specifications of each heat exchanger are different, and the hot air inside can be evenly distributed to the single board. After drying, the moisture content of the veneer is uniform, smooth, without wrinkles or end ripples, without cracks, and the surface is in good glued state.
3、The roller veneer dryer adopts frequency conversion speed regulation, which can adjust the feeding speed according to your veneer thickness and moisture content, so as to achieve the ideal drying effect.
4、The fuel source can be waste wood or bark after peeling, which can greatly reduce fuel costs for users.
5、Perfect after-sales service system, 24-hour online service, remote operation, so that customers can rest assured after installation. Regular follow-up services for old customers, sufficient and timely supply of spare parts.
Product Parameters of Wood Veneer Dryer
Wood species | Veneer Drying capacity (m³/h) | Veneer water moisture | Veneer thickness and size | |||
1 deck veneer dryer | 2 deck veneer dryer | 4 deck veneer dryer | 6 deck veneer dryer | |||
Eucalyptus | 0.5-2 | 1-3.3 | 2-9.0 | 15-17 | Fresh Veneers (above 70%) to about 0-10% | 0.8-8mm |
Birch | 0.6-2.2 | 1.2-3.8 | 2.3-10 | 15-18 | Fresh Veneers (above 70%) to about 0-10% | 0.8-8mm |
Rubberwood | 0.6-2.2 | 1.2-3.8 | 2.3-10 | 15-18 | Fresh Veneers (above 60%) to about 0% | 0.8-8mm |
Poplar | 0.6-2.2 | 1.2-3.8 | 2.3-10 | 15-18 | Fresh Veneers (above 50%) to about 0-10% | 0.8-8mm |
Beech | 0.6-2.2 | 1.2-3.8 | 2.3-10 | 15-18 | Fresh Veneers (above 70%) to about 0-10% | 0.8-8mm |
Pine | 0.6-2.2 | 1.2-3.8 | 2.3-10 | 15-18 | Fresh Veneers (above 70%) to about 0-10% | 0.8-8mm |
Other | 0.6-2.2 | 1.2-3.8 | 2.3-10 | 15-18 | Fresh Veneers (above 70%) to about 0-10% | 0.8-8mm |
shine veneer dryer can dry various types of wood. If you want to know more detailed information, please feel free to contact us! | ||||||
Customer Case
The Factory
The installation
Packaging & Shipping
Our Services
Pre-sale services:
1) Provide the free consultation of all veneer production line
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory.
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
After sale services:
1) 24 hours online service.
2) Provide the VIDEO with Install and debug the equipment.
3) Provide technical exchanging（Technical phone：+8615806625431）Door to door service is possible.
