continuous roller veneer dryer

1.Professional factory production

2.Customizable (customized one-stop service)

3.Convenient installation (installation can be completed in 25-30 days)

4.Stable equipment and low failure rate

5.Low comprehensive operating cost, the cost of one cubic board is 6-12$/m3

6.Highly automated and efficient (fully automatic veneer feeding and receiving system)


  Contact Now
Product Details

The working width and working length of the wood veneer drying machine can be customized according to the specific drying capacity requirement needed by the different customers. Shine heat exchanger adopts step by step heat transfer, and the specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer. The veneer after drying has uniform moisture content, flat, no buckle or end waviness;  free of splits and the surface is in good condition for gluing.


Veneer Dryer Machine.jpg


Advantages of Veneer Dryer Machine


1.  The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.

2.  The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content.  Simple operation and low failure rate.

3.  The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.

4.  After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.

5.  Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.

6.  We have a professional R&D team which can design different models according to customer’s special requirement.

7.  The perfect after-sale service team can supply 24 hours online service.


Veneer Dryer Machine.jpg


Product Parameters of Roller Veneer Dryer


Model No

GTH30-28

Working Width

3.0m

Deck

4

Roller material

Q235B, φ102 special shaft tube

Heating area length

24m

Cooling area length

4m

Veneer thickness and size

0.8-8mm

Veneer water moisture

Fresh veneer to about 8-10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/day)

80-85

Veneer transport speed

5-22m/min,16A chain

Hot air blower

Power: 4KW(24pc)

Traction motor

Power: 5.5KW,frequency control(4pc)

Cold air blower

Power: 4KW(4pc)

Air intake fan

Power: 11KW(1pc)

10 ton biomass burner

Power: 16.5KW

Total power

161.5KW

Actual electricity consumption

About 114kwh per hour


Veneer Dryer Machine.jpg


Customer Case


Customer Case.jpg


The Factory


The Factory.jpg


Packaging & Shipping


Packaging & Shipping.jpg

Send your message to us
x