4 deck jet roller veneer dryer
Type: Roller Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 32m
Drying capacity (m³/day) : 80-90
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
If you want to know more details about the machine (performance, detailed parameters, videos, etc.), please contact us(WhatsApp: +8615806625431)
4 Deck Jet Roller Veneer Dryer
SHINE Roller veneer Dryer adopts the new axial flow fan, the whole machine power is reduced by Thirty-eight percent, low energy consumption, high output, the heat source can be selected according to the situation (biomass burner, thermal oil, natural gas, etc.), choose Shine to provide you with the best solution of low-cost veneer dryer.
Advantages of Veneer Dryer Machine
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6. We have a professional R&D team which can design different models according to customer’s special requirement.
7. The perfect after-sale service team can supply 24 hours online service.
Product Parameters of Roller Veneer Dryer
Model No | GTH30-28 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 24m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 80-85 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（24pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 11KW（1pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 161.5KW |
Actual electricity consumption | About 114kwh per hour |
Customer Case
The installation
The Factory
Packaging & Shipping
