Veneer Making Process-manufacture,factory,supplier from China

These are two sets of 2 deck veneer dryers from our old South African customer.They were installed and guided by our engineers.The customer was very satisfied after buying one of our machines,and then bought the second one.Now Both are in normal use, and the customer feels that the equipment is very good,and the operation is convenient,and the dried veneer is very flat.We are very grateful to South African users for their support.We will continue to work hard in the process of research and development and production to complete the task with quality and quantity.We are also very welcome to vis

Since the veneer dryer is a long and large-scale equipment, the correct order and method should be followed when installing the veneer dryer. The correct installation process is as follows:1. Draw the foundation line: correctly draw the cross lines and elevation lines on the foundation mark plate, and bury the center mark board to be easy to use, accurate and consider that the machine base will not be covered after installation.2.

1. Operating system:The planed (rotary) veneer is fed from the feed port of the wind-jet roller type veneer dryer, and through the relative rotation of several pairs of upper and lower rollers inside the dryer, the planed and rotary-cut veneer is rotated in the predetermined direction. Front running, during the veneer traveling process, the hot air of 110-150 degrees Celsius is vertically sprayed to the upper and lower surfaces of the veneer at the wind speed of V=1.5M/S through the air nozzle installed between the two pairs of rollers.

Shine Machinery Co., Ltd. held a two-day centralized training for company members on August 12, 2022. The training contents include product performance sorting of Shine biomass veneer dryer, business speech training, after-sales service process, etc. Each business manager presents in the form of mind map. The atmosphere on the site was warm. The senior engineer explained the relevant contents and actively interacted with the colleagues participating in the training. The training is in the form of knowledge competition with awards, and finally the general manager gives awards.

The concept of technological veneerTechnological veneer is scientifically known as reconstructed decorative veneer, which is a kind of artificial wood veneer used for imitation of natural wood grain. Technological veneer is a wood surface material processed by modern scientific and technological means. It retains the texture and feel of natural wood through advanced production technology, while enhancing the physical properties of wood, such as wear resistance and corrosion resistance.

The small vertical veneer dryer can make your veneer reach the required dryness in a short time, improve production efficiency, occupy a small area, and is easy to operate. It only requires three people to produce, and is energy-saving and environmentally friendly. If you are the boss of a veneer company, then this small flap dryer is definitely your must-have equipment, making your production more efficient.The vertical veneer dryer is a type of horizontal dryer, which is a drying equipment based on the principle of two-way conveying.

Many people may encounter the board stuck problem in the process of using the veneer dryer.

Recently, a customer came to our factory to inspect the equipment, including some accessories of the veneer dryer. Our sales manager and boss received the reception together and answered questions throughout the process. The customer was very satisfied with our veneer drying equipment and signed the contract on site. After buying a piece of equipment, Shine is very grateful to our customers for their trust and recognition of us. We promise to continue to do better, and you are welcome to contact us at any time!

In the production of plywood, there is an important process. Although we cannot see its effect with the naked eye, it has a vital impact on the quality of the board. It is veneer drying. Why do veneers need to be dried? This is mainly because before the peeling process, in order to soften the wood, improve its plasticity and the quality of veneer peeling, the wood segments usually undergo hydrothermal treatment, resulting in a high moisture content of the veneer after peeling.

Recently, a customer team from Thailand made a special trip to visit our company for a field investigation and technical exchange of veneer dryer equipment. This visit not only deepened the understanding between the two parties, but also laid a solid foundation for future cooperation.During the visit, our company's technical team provided customers with detailed equipment explanations and on-site demonstrations. The customer first visited our production workshop, watched the actual operation process of the veneer dryer, and understood the whole process from feeding to drying.