Veneer Dryer Control Cabinet-manufacture,factory,supplier from China

The 40m 2 deck veneer dryer purchased by an Indonesian customer has now been installed and is being debugged.Due to the epidemic,we could not send someone to guide the installation.The customer successfully installed it in our video and chat communication instructions.Thank you very much for your support Our biomass burner,which can directly burn all kinds of waste wood,saves fuel efficiently; it adopts automatic control and frequency conversion control system,which can automatically adjust the transmission speed and To achieve the ideal drying effect,if you are interested in our machine,pleas

The 2 deck veneer dryer with biomass burner is currently in operation. It is used to dry rubber wood. It adopts full automatic control and frequency conversion control system. It can automatically adjust the transmission speed and temperature according to the thickness and moisture content of different veneers to achieve the ideal drying effect and accurately control the final moisture content. It avoids the phenomenon that a large number of veneers are over-dried or dried to meet the process requirements. The dried veneer is flat and wrinkle-free. We welcome you to visit the case site.

After purchasing one of our veneer dryers, our Zimbabwean customers have recently purchased a second veneer dryer , which is currently being installed, along with our biomass burners, by our engineers The installation is carried out under the guidance, and the customer feedback is very good. If there is a need in the future, we will continue to buy our equipment. Thank you for your trust in us.

Recently, due to the impact of the epidemic, many customers were unable to go to the site to see the equipment. We organized an online viewing site, and our engineer gave a comprehensive explanation of the veneer dryer in live video. Finally, the questions raised by customers were all Answer one by one, if you also want to see the scene of equipment operation, please feel free to contact us.

The Latvian customer bought our 4 deck veneer dryer and biomass burner, which is automatic board loading and semi-automatic board collecting to save labor cost, and the dried veneer is smooth without wrinkles, with good effect. We have a professional r & D team, can design different models according to the special requirements of customers, if you need to feel free to contact us.

In 2020,a friend from Singapore successfully cooperated with us.This is a friend from a long time ago.After adding our contact information,he became very interested in our veneer dryer,but he was worried about the output of the machine.never negotiated a cooperation,and finally,after visiting our factory,the customer dispelled his concerns and showed great interest in our patented biomass burning furnace,because this furnace can reasonably use the scraps from the rotary cutting Combustion,rational use of resources,and will not produce environmental pollution,smog and other effects,and finally

After the on-site drying test, the shrinkage rate of the veneer before and after drying by Shine veneer dryer is 2-2.5 cm, and the moisture content can be dried to zero, or it can be dried to the moisture you need according to your requirements. It adopts automatic control and frequency conversion control system, which can automatically adjust the transmission speed and temperature according to different veneer thickness and moisture content, so as to achieve the ideal drying effect. Biomass burners can directly burn all kinds of waste wood, saving drying costs.

Many people may encounter the problem of veneer jamming when using the roller veneer dryer. In order to avoid this problem, the following suggestions can be taken: First, keep the equipment clean, clean the dust collector and exhaust duct, and minimize the accumulation of dust; second, do a good job of adjusting the equipment, reduce the friction and wear of the equipment, and regularly check the status of the roller bearings; finally, pay attention to the control of drying temperature and humidity to avoid excessive temperature and humidity, which will cause veneer deformation and jamming.

1. Operating system:The planed (rotary) veneer is fed from the feed port of the wind-jet roller type veneer dryer, and through the relative rotation of several pairs of upper and lower rollers inside the dryer, the planed and rotary-cut veneer is rotated in the predetermined direction. Front running, during the veneer traveling process, the hot air of 110-150 degrees Celsius is vertically sprayed to the upper and lower surfaces of the veneer at the wind speed of V=1.5M/S through the air nozzle installed between the two pairs of rollers.

The veneer dryer purchased by the South African customer has 4 deck of 50 meters and a width of 4.5 meters. It uses an automatic dialing machine, a semi-automatic dividing board machine and a collecting machine. It is equipped with our 15-ton biomass burner and can directly burn waste trees. It not only solves the problem of waste accumulation for customers, but also saves fuel costs for customers. The fully automatic control and frequency conversion control system can automatically adjust the transmission speed and temperature according to different veneer thickness and moisture content.