Thickness Gauge Measure Tool-manufacture,factory,supplier from China

First: the type of wood to be dried, whether poplar, pine, eucalyptus, or rubber wood.Second: The thickness and size of the dried veneer, such as 1.7 or 2.2 thickness, four-piece or three-piece, etc.Third: What is the moisture content requirement and output after drying, how much water needs to be dried, and how many square meters or boards need to be dried in one day.Fourth: Workshop size and heat sourceAfter determining these points, the model of veneer dryer you need can be determined.

The double-layer 30-meter-equipped 4-ton burner purchased by our customer in Zimbabwe has been installed and is currently in operation. The customer is using it to dry pine and eucalyptus wood with a thickness of 2.45mm. The feedback is that the effect is very good, and the production capacity will be expanded in the future. Will continue to purchase. We are very grateful to our customers for their trust in us. If you also want to know more product information, we welcome you to contact us at any time!This dryer adopts new technology.

The veneer needs to be dried before use, so that the wood will not be prone to problems in future use, and the dried board will be easier to preserve. Let's take a look at how a dryer works.Wood veneers are processed and divided into boards of equal thickness before entering the dryer. After entering the inside of the machine, it is heated and evaporated. Adopt high temperature and rapid drying construction technology. The treated boards are less prone to cracks and deformation problems.

Shine veneer dryers are available with outputs ranging from a dozen cubic meters to more than a hundred cubic meters. They have their own heat source biomass burner; they can directly burn waste bark to save fuel costs (it can also be used with other heat sources). The newly upgraded dryer reduces the power of the whole machine by 38%, achieving true energy saving. The automatic control system is adopted to automatically adjust the transmission speed and temperature according to different veneer thickness and moisture content to achieve the ideal drying effect.

The 2 deck veneer dryer with biomass burner is currently in operation. It is used to dry rubber wood. It adopts full automatic control and frequency conversion control system. It can automatically adjust the transmission speed and temperature according to the thickness and moisture content of different veneers to achieve the ideal drying effect and accurately control the final moisture content. It avoids the phenomenon that a large number of veneers are over-dried or dried to meet the process requirements. The dried veneer is flat and wrinkle-free. We welcome you to visit the case site.

After the on-site drying test, the shrinkage rate of the veneer before and after drying by Shine veneer dryer is 2-2.5 cm, and the moisture content can be dried to zero, or it can be dried to the moisture you need according to your requirements. It adopts automatic control and frequency conversion control system, which can automatically adjust the transmission speed and temperature according to different veneer thickness and moisture content, so as to achieve the ideal drying effect. Biomass burners can directly burn all kinds of waste wood, saving drying costs.

The veneer dryer purchased by the South African customer has 4 deck of 50 meters and a width of 4.5 meters. It uses an automatic dialing machine, a semi-automatic dividing board machine and a collecting machine. It is equipped with our 15-ton biomass burner and can directly burn waste trees. It not only solves the problem of waste accumulation for customers, but also saves fuel costs for customers. The fully automatic control and frequency conversion control system can automatically adjust the transmission speed and temperature according to different veneer thickness and moisture content.

In the face of rising labor costs, looking for highly automated solutions has become a customer demand, are you also looking for highly automated solutions? Shine fully automatic intelligent drying production line adopts fully automatic control and frequency conversion control system to automatically adjust the speed and temperature according to the different thickness and moisture content of the veneer. Exclusive plan! Bringing you an easier and more efficient drying process! Whether you pursue high automation or pay attention to manual operation, Shine can meet your needs.

Recently, the veneer dryer purchased by our Russian customer has been produced and is ready for shipment. Our engineers will then go to the customer's factory to guide the installation. This equipment is a double-layer 36-meter-long burner with a 6-ton burner. It adopts new technology and reduces the overall power by 35%, saving energy and electricity. Customized according to the actual needs of customers, equipped with our biomass burner, it can directly burn various waste wood.

The 2024 World Forestry Congress will be held in Nanning from November 23 to 25, 2024. As an exhibitor of the Guangxi Nanning Forestry Congress, Shine sincerely invites you to visit our booth to discuss the infinite possibilities of future development!Booth number: D8 Hall 807+808Time: November 23-25, 2024Location: Nanning International Convention and Exhibition Center, GuangxiThe 2024 World Forest Industry Conference will be themed "Green Forest Industry, Cooperation and Sharing - Innovation Leading High-quality Development of Forest Industry".