process of veneer production-manufacture,factory,supplier from China

These are two sets of 2 deck veneer dryers from our old South African customer.They were installed and guided by our engineers.The customer was very satisfied after buying one of our machines,and then bought the second one.Now Both are in normal use, and the customer feels that the equipment is very good,and the operation is convenient,and the dried veneer is very flat.We are very grateful to South African users for their support.We will continue to work hard in the process of research and development and production to complete the task with quality and quantity.We are also very welcome to vis

1. Operating system:The planed (rotary) veneer is fed from the feed port of the wind-jet roller type veneer dryer, and through the relative rotation of several pairs of upper and lower rollers inside the dryer, the planed and rotary-cut veneer is rotated in the predetermined direction. Front running, during the veneer traveling process, the hot air of 110-150 degrees Celsius is vertically sprayed to the upper and lower surfaces of the veneer at the wind speed of V=1.5M/S through the air nozzle installed between the two pairs of rollers.

The concept of technological veneerTechnological veneer is scientifically known as reconstructed decorative veneer, which is a kind of artificial wood veneer used for imitation of natural wood grain. Technological veneer is a wood surface material processed by modern scientific and technological means. It retains the texture and feel of natural wood through advanced production technology, while enhancing the physical properties of wood, such as wear resistance and corrosion resistance.

Shine Machinery Co., Ltd. held a two-day centralized training for company members on August 12, 2022. The training contents include product performance sorting of Shine biomass veneer dryer, business speech training, after-sales service process, etc. Each business manager presents in the form of mind map. The atmosphere on the site was warm. The senior engineer explained the relevant contents and actively interacted with the colleagues participating in the training. The training is in the form of knowledge competition with awards, and finally the general manager gives awards.

The production process of plywood is a multi-step process involving raw material processing, veneer production, gluing and pressing, and post-processing. Here are the main production processes:1. Log processingCut: Cut logs into lengths suitable for peeling or planing (usually 2.6 meters or customized sizes).Debarking: Remove bark to reduce the impact of impurities on subsequent processes.Cooking and softening (optional): Soak or cook logs (temperature about 60-80℃) to soften wood fibers for peeling.2.

Since the veneer dryer is a long and large-scale equipment, the correct order and method should be followed when installing the veneer dryer. The correct installation process is as follows:1. Draw the foundation line: correctly draw the cross lines and elevation lines on the foundation mark plate, and bury the center mark board to be easy to use, accurate and consider that the machine base will not be covered after installation.2.

After purchasing one of our veneer dryers, our Zimbabwean customers have recently purchased a second veneer dryer , which is currently being installed, along with our biomass burners, by our engineers The installation is carried out under the guidance, and the customer feedback is very good. If there is a need in the future, we will continue to buy our equipment. Thank you for your trust in us.

Many people may encounter the board stuck problem in the process of using the veneer dryer.

Recently, due to the impact of the epidemic, many customers were unable to go to the site to see the equipment. We organized an online viewing site, and our engineer gave a comprehensive explanation of the veneer dryer in live video. Finally, the questions raised by customers were all Answer one by one, if you also want to see the scene of equipment operation, please feel free to contact us.

In the production of plywood, there is an important process. Although we cannot see its effect with the naked eye, it has a vital impact on the quality of the board. It is veneer drying. Why do veneers need to be dried? This is mainly because before the peeling process, in order to soften the wood, improve its plasticity and the quality of veneer peeling, the wood segments usually undergo hydrothermal treatment, resulting in a high moisture content of the veneer after peeling.