Knife Grinder Machine-manufacture,factory,supplier from China

Our veneer drying equipment purchased by the customer is being installed under the guidance of our engineers.After the installation and test machine,the customer feedback is very good,and they are very satisfied with our equipment.Thank customers for their trust in us.

The veneer dryer is mainly used for drying veneer and is the main machine for producing plywood. Due to the high moisture content inside the newly rotary-cut veneer, the purpose of the equipment is to reduce the moisture content of the veneer to meet the requirements, while reducing material loss. The equipment has the characteristics of high thermal efficiency and small heat loss, which can effectively improve the work efficiency and the quality of plywood products. However, there are a few things to be aware of when using the device.Precautions for the use of veneer dryers1.

The 4 deck veneer dryer purchased by the Myanmar factory is used to dry rubber wood,and the customer feedback is very good,it is used with a biomass burner.The biomass burner acts as a heat source,providing high temperature to the dryer to ensure enough heat to effectively impact the wet veneer.At the same time,the bark of the peeling machine and the waste veneer of the rotary cutter are directly incinerated as fuel,which solves the problem of waste accumulation in the veneer plywood factory.veneer dryer video

The 40m 2 deck veneer dryer purchased by an Indonesian customer has now been installed and is being debugged.Due to the epidemic,we could not send someone to guide the installation.The customer successfully installed it in our video and chat communication instructions.Thank you very much for your support Our biomass burner,which can directly burn all kinds of waste wood,saves fuel efficiently; it adopts automatic control and frequency conversion control system,which can automatically adjust the transmission speed and To achieve the ideal drying effect,if you are interested in our machine,pleas

Recently, our company successfully completed the installation and commissioning of a 2 deck veneer dryer customized by Thailand customers. The veneer dryer installed this time was customized by our company according to the needs of Thailand customers. Compared with traditional veneer dryers, it can significantly increase production capacity and effectively reduce energy consumption.

The newly upgraded plywood dryer machine mainly has the following features:1. Heat exchange systemShine heat exchangers adopt step-by-step heat exchange. The specifications of the heat exchangers in each section are different. The hot air in the heat exchanger can be evenly distributed to the single board. The dried veneer has a uniform moisture content, is smooth, has no wrinkles or end ripples, no cracks, and the surface is in good bonding condition, which fully improves energy utilization and saves unnecessary energy waste.2.

The installation of the 2 deck veneer dryer purchased by another of our customers has been completed! This wood veneer dryer is equipped with our biomass burner, which saves fuel costs and uses new technology to save energy and electricity. Our engineers will go to the customer's factory to guide the installation. The engineers will not return until the test machine is completed and normal operation occurs. The dried boards are smooth and wrinkle-free.

Now many people come to inquire about veneer dryers, let the editor help you analyze why choosing veneer dryers is the future trend!1. At present, the government is gradually canceling natural drying to protect cultivated land2. The boards dried naturally are not as flat as the ones dried by the machine, and the effect is better. The boards dried naturally are sold at a lower price3. The domestic and foreign demand of the dryer industry has entered a period of growth4. The period required for natural drying is longer, and the drying period is greatly shortened by using a dryer5.

A 2 deck veneer dryer ordered by our Vietnamese customers is ready for shipment. It uses a new axial flow fan, which reduces the power of the whole machine by 38%, saving energy and electricity for you. It uses a biomass burner for heating, which can directly burn the bark, and the dried boards are flat and wrinkle-free. At that time, we will send engineers to the customer's factory to guide the installation, and will not return until the equipment is operating normally, and after-sales service is guaranteed.

Recently, the 2 deck roller veneer dryer purchased by our Vietnamese customer has been installed and successfully tested and operated normally. The engineers have trained the workers to operate the veneer dryer skillfully before returning. We welcome you to visit the case site. The veneer dryer is equipped with a biomass burner, which directly burns the bark, saving fuel costs. It uses a new axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the user's later operating costs.