conveyor veneer roller drying machine-manufacture,factory,supplier from China

Our veneer drying equipment purchased by the customer is being installed under the guidance of our engineers.After the installation and test machine,the customer feedback is very good,and they are very satisfied with our equipment.Thank customers for their trust in us.

Our veneer dryer purchased by Myanmar customers last year is being delivered,and customers will receive it soon.We have a professional R&D team that can design different models according to customer’s special requirement.Perfect after-sale service system can supply 24h online service,remote operation is available on request,regular customer visits,sufficient spare parts supply in time.If you have any needs,please feel free to contact us.

1. Operating system:The planed (rotary) veneer is fed from the feed port of the wind-jet roller type veneer dryer, and through the relative rotation of several pairs of upper and lower rollers inside the dryer, the planed and rotary-cut veneer is rotated in the predetermined direction. Front running, during the veneer traveling process, the hot air of 110-150 degrees Celsius is vertically sprayed to the upper and lower surfaces of the veneer at the wind speed of V=1.5M/S through the air nozzle installed between the two pairs of rollers.

The veneer dryer is mainly used for drying veneer and is the main machine for producing plywood. Due to the high moisture content inside the newly rotary-cut veneer, the purpose of the equipment is to reduce the moisture content of the veneer to meet the requirements, while reducing material loss. The equipment has the characteristics of high thermal efficiency and small heat loss, which can effectively improve the work efficiency and the quality of plywood products. However, there are a few things to be aware of when using the device.Precautions for the use of veneer dryers1.

The 40m 2 deck veneer dryer purchased by an Indonesian customer has now been installed and is being debugged.Due to the epidemic,we could not send someone to guide the installation.The customer successfully installed it in our video and chat communication instructions.Thank you very much for your support Our biomass burner,which can directly burn all kinds of waste wood,saves fuel efficiently; it adopts automatic control and frequency conversion control system,which can automatically adjust the transmission speed and To achieve the ideal drying effect,if you are interested in our machine,pleas

The roller veneer dryer can dry various types of veneers, including softwood, hardwood, bamboo, etc. (such as some common wood types such as eucalyptus, birch, poplar, pine, spruce, oak, maple, Walnut, teak, etc.). It should be noted that different types of wood have different fiber structures, densities, moisture content and other characteristics. Therefore, when using a roller veneer dryer to dry wood, it is necessary to set appropriate parameters according to the characteristics of different wood to ensure Drying results and quality. and perform proper maintenance and upkeep on the machine.

Now many people come to inquire about veneer dryers, let the editor help you analyze why choosing veneer dryers is the future trend!1. At present, the government is gradually canceling natural drying to protect cultivated land2. The boards dried naturally are not as flat as the ones dried by the machine, and the effect is better. The boards dried naturally are sold at a lower price3. The domestic and foreign demand of the dryer industry has entered a period of growth4. The period required for natural drying is longer, and the drying period is greatly shortened by using a dryer5.

The customer factory reported that the veneers dried by the veneer dryer used in the past would have cracking problems. What is the cause of this phenomenon?This is likely to involve the internal structure of the dryer and the stability of the dryer operation. Come and see.The spacing between the rollers of the veneer drying. Technically speaking, the roller spacing from the axis to the axis of the 4 deck roller dryer is 330mm. The upper and lower air ducts are laid between the front and rear rollers.

African veneer bosses often ask me, why is the veneer that is baked in a dryer so damp? To answer this question, there are two main reasons:1. Water absorption of wood itselfWood has a certain range of moisture content, which is adjusted with changes in ambient temperature and humidity. Even after drying, some moisture will still remain in the wood. If the humidity in the storage environment is high, the wood will absorb the surrounding moisture, causing the moisture content to rise, resulting in moisture return.2.

Recently, the 2 deck roller veneer dryer purchased by our Vietnamese customer has been installed and successfully tested and operated normally. The engineers have trained the workers to operate the veneer dryer skillfully before returning. We welcome you to visit the case site. The veneer dryer is equipped with a biomass burner, which directly burns the bark, saving fuel costs. It uses a new axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the user's later operating costs.