continuous roller veneer dryer-manufacture,factory,supplier from China

1. Operating system:The planed (rotary) veneer is fed from the feed port of the wind-jet roller type veneer dryer, and through the relative rotation of several pairs of upper and lower rollers inside the dryer, the planed and rotary-cut veneer is rotated in the predetermined direction. Front running, during the veneer traveling process, the hot air of 110-150 degrees Celsius is vertically sprayed to the upper and lower surfaces of the veneer at the wind speed of V=1.5M/S through the air nozzle installed between the two pairs of rollers.

With the continuous demand of the wood industry for high efficiency and processing technology, veneer dryers, as key equipment for wood processing, have also made significant progress in technological innovation in recent years. The continuous advancement of technological innovation has also brought new opportunities to the market. Many companies have begun to pay attention to digital and automated drying technology to cope with market competition by improving production efficiency and reducing energy consumption.

The Latvian customer bought our 4 deck veneer dryer and biomass burner, which is automatic board loading and semi-automatic board collecting to save labor cost, and the dried veneer is smooth without wrinkles, with good effect. We have a professional r & D team, can design different models according to the special requirements of customers, if you need to feel free to contact us.

Many people do not know how to maintain the dryer to extend its service life. Let us take you to understand the daily maintenance of the dryer.1. Clean the inside and outside of the dryer regularly to ensure good ventilation and smooth hot air flow.2. Check the connections and components of the electrical system to see if the components are damaged, aged or loose. If necessary, repair or replace the problematic parts.3. Regularly check the fasteners, belts and chains of the drive system, lubricate and replace necessary parts.4.

The roller veneer dryer can dry various types of veneers, including softwood, hardwood, bamboo, etc. (such as some common wood types such as eucalyptus, birch, poplar, pine, spruce, oak, maple, Walnut, teak, etc.). It should be noted that different types of wood have different fiber structures, densities, moisture content and other characteristics. Therefore, when using a roller veneer dryer to dry wood, it is necessary to set appropriate parameters according to the characteristics of different wood to ensure Drying results and quality. and perform proper maintenance and upkeep on the machine.

The working principle of the veneer dryer is to use hot air to heat and dry the veneer. The following is a detailed description of the working principleThe veneer dryer consists of a feed port, a drying area, a cooling area, a discharge port, etc.Feeding: The veneer enters from the feed port of the dryer. After entering the dryer, the veneer is pushed forward by the relative rotation of the internal rollers (the upper roller rotates by its own weight, and the lower roller is kept stationary by the bearing).Heat source and burner: The veneer dryer uses different heat sources for heating.

The customer factory reported that the veneers dried by the veneer dryer used in the past would have cracking problems. What is the cause of this phenomenon?This is likely to involve the internal structure of the dryer and the stability of the dryer operation. Come and see.The spacing between the rollers of the veneer drying. Technically speaking, the roller spacing from the axis to the axis of the 4 deck roller dryer is 330mm. The upper and lower air ducts are laid between the front and rear rollers.

Let us congratulate our European customer on the newly ordered roller veneer dryer, which adopts a fully automatic board loading and collecting system. This equipment model is specially customized for the customer. This veneer dryer is equipped with a fully automatic board loading and collecting system, which not only improves production efficiency, but also reduces labor costs and ensures uniform drying of veneer.

The Vertical Veneer Dryer purchased by our customer in Cote d'Ivoire has been produced and is being prepared for shipment. This equipment has a daily output of more than 30 cubic meters. It is equipped with a built-in furnace, occupies a small area, and saves labor. If you are also inspecting equipment, please feel free to contact us. Vertical dryers and roller dryers are available for you to choose from.

Recently, the roller veneer dryer purchased by our Thai customer has been installed and tested. Our engineers went to the customer's factory to guide the installation and trained the customer's workers. The engineers will not return until the workers are proficient in operation. The drying process of the veneer dryer consists of two parts: blowing heating by the blower pipe and contact heating by the upper and lower pressing rollers. Double heating improves the heating efficiency.