Birch Wood Veneer Dryer-manufacture,factory,supplier from China

The three-day exhibition of wood industry and woodworking machinery and equipment was successfully concluded.  At the exhibition, we showed our company's advanced drying equipment with many enterprise operators in the wood processing industry, which was recognized by the majority of merchants.  At the same time, we also received many new needs and opinions for wood drying equipment from people in the industry, We will develop better products in the future equipment R & D and improvement work in combination with the current market demand.

Birch veneer is prone to mildew and blue or red spots after drying. Keeping these two points in mind can help you easily solve the mold problem. First, dry it to about 4-5 moisture, which is equivalent to zero moisture. There will be no mildew problem for 2-3 years. Secondly, it is ideal to place the freshly peeled wet board for 3-5 days before drying. In summer, it needs to be dried after about three days of stacking. If the stacking time is too long, the inside of the board will heat up and spots are prone to appear.

The roller veneer dryer can dry various types of veneers, including softwood, hardwood, bamboo, etc. (such as some common wood types such as eucalyptus, birch, poplar, pine, spruce, oak, maple, Walnut, teak, etc.). It should be noted that different types of wood have different fiber structures, densities, moisture content and other characteristics. Therefore, when using a roller veneer dryer to dry wood, it is necessary to set appropriate parameters according to the characteristics of different wood to ensure Drying results and quality. and perform proper maintenance and upkeep on the machine.

The 4 deck veneer dryer purchased by the Myanmar factory is used to dry rubber wood,and the customer feedback is very good,it is used with a biomass burner.The biomass burner acts as a heat source,providing high temperature to the dryer to ensure enough heat to effectively impact the wet veneer.At the same time,the bark of the peeling machine and the waste veneer of the rotary cutter are directly incinerated as fuel,which solves the problem of waste accumulation in the veneer plywood factory.veneer dryer video

Pine is considered one of the difficult woods to dry, primarily due to its woody structure and composition.1. Uneven density: The fibers of pine wood are relatively thin and soft, resulting in uneven density within the wood. This causes the wood to dry at an inconsistent rate and is prone to cracking and warping.2. High moisture content: Compared with other woods, pine has a higher moisture content. It takes longer for the moisture inside the wood to evaporate completely.

Since the veneer dryer is a long and large-scale equipment, the correct order and method should be followed when installing the veneer dryer. The correct installation process is as follows:1. Draw the foundation line: correctly draw the cross lines and elevation lines on the foundation mark plate, and bury the center mark board to be easy to use, accurate and consider that the machine base will not be covered after installation.2.

After purchasing one of our veneer dryers, our Zimbabwean customers have recently purchased a second veneer dryer , which is currently being installed, along with our biomass burners, by our engineers The installation is carried out under the guidance, and the customer feedback is very good. If there is a need in the future, we will continue to buy our equipment. Thank you for your trust in us.

Customer site installation is a 2 deck wood roller dryer, equipped with our biomass burning furnace, can directly burn waste bark, in addition to the customer's own installation of dust removal device, environmental protection problems are basically solved, now has been installed, ready for production, want to see the actual operation of the dryer can contact us at any time! It can be customized according to your actual production needs, and the output is from ten to hundreds of squares, which is highly efficient and energy saving.

Recently, our new customer successfully installed and put into use the 2 deck veneer dryer provided by our company. During normal operation, the veneer dryer has successfully completed the efficient drying of rubber wood veneers. Normal drying of rubber wood veneers can be dried to zero water, and the drying effect is satisfactory. It not only greatly improves the production efficiency of veneer processing, but also shows great advantages in environmental protection and energy saving.

The hardness of wood is mainly affected by factors such as wood species, density and moisture content. However, the following treatment methods can increase the hardness of wood:Heat treatment: Heat treatment is a method of changing the physical and chemical properties of wood by heating it. This treatment method can increase the hardness, stability and durability of wood.Compression treatment: Compression treatment is a method of compressing wood to a higher density.