Product Introduction of 26 m Face Veneer Mesh Belt DryerFor the thin veneer, the face veneer mesh belt dryer will be more suitable.The mesh belt veneer dryer is used for drying veneers with rotary cutting and slicer and it is designed especially to dry the very thin face veneer typically at 0.2-1.2mm thickness. The drying capacity of 26m 2deck veneer dryer can achieve 1.5-2m³/h. The veneer after drying is flat, moisture content is up to national standard.
Contact Now
Product Description of 20 m 1 Deck Mesh Belt Dryer Machine20 m 1 deck mesh belt dryer machine is a closed-belt dryer. Its feature is that only the feed end and the discharge end are open, and the others are closed. Hot air flows through the equipment and the heat loss is low, which can save a lot of energy.
Contact Now
Product Description of 30 m 3 Deck Veneer Mesh Belt Dryer30 m 3 deck veneer mesh belt dryer is important machine in plywood processing. When you peeling get fresh veneer, for long stock, need remove water and moisture, so you need core veneer dryer or drying line. Shine 3 deck veneer dryers have the salient features of higher price performance ratio, higher drying capacity. 30m 3 deck mesh belt dryer is suitable for drying thin face veneer, which can dry about 2.7m³ veneer per hour.
Contact Now
Product Introduction of 20 m Continuous Mesh Belt Veneer DryerThe mesh belt veneer dryer adopts 304 stainless steel to reduce the pollution of veneer, which is one of the main equipment in plywood production used to dry the veneer with thickness under 1.5mm. Hot air passes through the veneer, vaporizes the moisture of the veneers, and part of the wet steam is discharged from the box, and the other part is recycled. So it can improve the heat utilization rate.
Contact Now
Veneer Mesh Belt DryerThe veneer mesh belt dryer is designed to handle the drying process of face veneer, back veneer and long core veneer.For process the surface veneer and long core veneer, this veneer dryer can avoid the break of the veneer, then can raise the veneer utilization ratio and production output.All outfitted air blower and screen are the high quality production, so it can increase the durability and useful life of the machine.We can design the machine upon our customer`s requirement.Product Parameters of Veneer Mesh Belt Dryer1.
Contact Now
Product Description of 0.8 m³/h Capacity Veneer Dryer0.8 m³/h Capacity Veneer Dryer uses the latest international veneer drying technology,which has the advantages of simple operation,safe and practical, stable operation,easy maintenance and so on.Shine’s veneer dryer can work 24 hours a day,only 4-5 labors are needed, which greatly saves labor costs.The moisture content of the dried veneer is uniform and flat.Low machine failure rate reduces downtime.one deck 0.8 m³/h Capacity Veneer DryerVeneer Dryer in Biazil Customer Factory Product Parameter of 0.8 m³/h Capacity Veneer DryerMode
Contact Now
Mesh Belt Veneer DryerThe mesh belt veneer jet dryer machine is usually used for drying continuous ribbons before cutting. The mesh belt veneer dryer is designed especially for the face veneer with a thickness of 0.2-1mm. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.Features of Mesh Belt Veneer Dryer1.
Contact Now
Product Description of 0.5 m³/h Veneer Dryer MachineVeneer Dryer Machine has the advantages of high efficiency, energy saving, low drying cost and good drying effect.
Contact Now
Mesh Belt DryerFor the thin veneer, the stainless steel mesh belt dryer will be more suitable. The mesh belt veneer dryer is used for drying veneers with rotary cutting and slicer and it is designed specially to dry the very thin face veneer typically at 0.2-1.2mm thickness. The drying capacity of 26m 2deck veneer dryer can achieve 1.5-2m³/h. The veneer after drying is flat, the moisture content is up to national standard.
Contact Now
continuous mesh belt dryerThe continuous mesh belt dryer which is one of the main equipment in veneer and plywood production and can be used for continuous drying operation. It is used for drying veneers with rotary cutting and slicer and it is designed especially to dry the very thin face veneer typically at 0.2-1.2mm thickness. It is composed of four parts, which are divided into feeding area, heating area, cooling area and discharging area.
Contact Now
Mesh belt dryer is a closed-belt dryer. Its feature is that only the feed end and the discharge end are open, and the others are closed. Hot air flows through the equipment and the heat loss is low, which can save a lot of energy. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.
Contact Now
Plywood Face Veneer Drying Machine Mesh belt net dryer consists of several independent unit sections. Mesh belt dryer is a closed-belt dryer. Its feature is that only the feed end and the discharge end are open, and the others are closed. Hot air flows through the equipment and the heat loss is low, which can save a lot of energy. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.
Contact Now
The mesh belt dryer is a highly efficient hot air drying equipment designed for face and veneer. It uses a mesh belt conveyor system to evenly distribute the veneer on the mesh belt and dry it through continuous hot air flow. This design not only ensures uniform dryingof the veneer, but also greatly improves production efficiency.
Contact Now
The mesh belt veneer dryer is an efficient and energy-saving wood drying equipment, mainly used for drying veneers, thin wood and other thin wood products. It achieves the ideal drying effect of veneers in a short time through uniform hot air flow and continuous mesh belt conveying.It realizes uniform drying of veneers and ensures that the humidity of veneers is controlled within the ideal range during the entire drying process.
Contact Now
Product Description of 30 m Veneer DryerThe 3 deck 30 m veneer dryer has the higher drying capacity compared to the 1 and 2 deck dryer while pricing is more favorable at the same time compared to 4 deck veneer dryer. Shine veneer roller dryer can consistently produce high quality veneer that has uniform dry moisture content, an aesthetic appearance, and is supple enough to minimize damage during the stacking process. Moreover, the veneer is dried in the most cost effective and environmentally friendly manner.
Contact Now
The Continuous veneer mesh belt dryer is designed to handle the drying process of face veneer, back veneer and long core veneer. For process the surface veneer and long core veneer, this veneer dryer can avoid the break of the veneer, then can raise the veneer utilization ratio and production output. All outfitted air blower and screen are the high quality production, so it can increase the durability and useful life of the machine.
Contact Now
Product Description of 40 m Roller Veneer DryerShine 40 m roller veneer dryer has the advantages of high efficiency, low fuel consumption and energy saving. The fuel cost of our veneer drying machine is much lower than thermal oil, steam gas, electricity and others. The composite cost of Shine veneer dryers machine is only about $10m³. The veneer after drying has uniform moisture content, flat without buckle or end waviness and the surface is in good condition for gluing.
Contact Now
Face Veneer Drying The continuous face veneer drying is one of the main types of equipment in veneer and plywood production and can be used for continuous drying operation. It is used for drying veneers with rotary cutting and slicer and it is designed specially to dry the very thin face veneer typically at 0.2-1.2mm thickness. The mesh dryer is composed of four parts, which are divided into the feeding area, heating area, cooling area, and discharging area.
Contact Now
Product Introduction of 56 m Veneer DryerThe 56 m veneer dryer is driven by the chain to run the upper and lower rollers, relying on the upper roller to press the veneer to run. Biomass combustion furnace is used to burn wood chips, waste wood and other materials at high temperature. Materials boil and fluidize in the burner to provide heat energy to the veneer dryer. For process the surface veneer and long core veneer, this veneer dryer can avoid the break of the veneer, then can raise the veneer utilization ratio and production output.
Contact Now
Mesh Veneer DryerMesh veneer dryer is mainly used for the production of plywood. Compared with common plywood-veneer roller jet dryers, Plywood Face Veneer Drying Machine can dry thinner veneer 0.2-0.8mm. The quality requirements for the plywood face veneer drying line are also higher than the commercial veneer dryer. Plywood Veneer Dryer Machine is widely used in flatting drying of high-grade plywood, multi-layer board, and architectural core face veneer. The composite cost is only $6-12/cubic meter.
Contact Now
Product Description of 20 m Core Veneer Dryer MachineShine 3 deck 20 m core veneer dryer machine is a new type of product for veneer drying, which has high drying capacity. The bearings installed on the dryers are featured high temperature 500 degrees Celsius resistance and low temperature -20 degrees Celsius resistance. Furthermore, no need for maintenance in daily operation.
Contact Now
Product Introduction of 40 m Wood Veneer Dryer Machine40 m wood veneer dryer machine has the merits of high-efficiency, saving-energy and good drying quality because of adopting new high technology and advanced control technology. The working width of Roller Veneer Dryer is 3 meters and can dry 0.6-8mm,the minmium can be dried to 0. The drying capacity of 40 m wood veneer dryer machine can achieve 2.5m³ per hour.
Contact Now
Product Introduction of 48 m Veneer Drying MachineThe 48 m veneer drying machine is based on the most advanced continuous pressure contact veneer drying technology in the world. working principle: is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. It can make The veneer after drying has uniform moisture content, flat, and it als
Contact Now
World-leading Veneer Dryers Manufacturer Shandong Shine Machinery Co., Ltd is a large-scale equipment manufacturer which specializing in development and manufacture of core veneer and face veneer dryer. Shandong Shine Machinery have professional R&D teams and experienced after-sale service teams to supply cost-effective drying solution for global clients.
Contact Now
