Roller Type Veneer Dryer
1.Customizable (customized one-stop service)
2.Low comprehensive operating cost, the cost of one cubic board is 6-12$/m3
3. Users can visit the case site nearby
4.Imported accessories, using thicker high-quality steel
5.Diverse heat source options
Roller veneer dryer is easy to operate, safe and practical, stable in operation and easy to maintain. It can be customized according to actual conditions. The unique heat exchange structure ensures the efficiency of equipment operation and greatly improves the output. Biomass burner has the advantages of high efficiency, low energy consumption and energy saving. By directly burning waste wood to generate high temperature, directly heat the air and transport it to the inside of the dryer without heat loss. The fuel cost is much lower than thermal oil, steam, electricity, etc. Our biomass burner has passed the inspection and acceptance of the environmental protection department.
Advantages of Veneer Dryer Machine
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6. We have a professional R&D team which can design different models according to customer’s special requirement.
7. The perfect after-sale service team can supply 24 hours online service.
Product Parameters of Veneer Dryer
Model No | GTH30-36 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 110 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（32pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 212.5KW |
Actual electricity consumption | About 149kwh per hour |
The heat exchanger adopts step-by-step heat exchange. The specifications of each section of the heat exchanger are different. The hot air in the heat exchanger can be evenly distributed to the veneer. The moisture content of the veneer after drying is uniform, flat, without wrinkles or end ripples, no cracks, and the surface bonding state is good, which fully improves the utilization rate of energy and saves unnecessary energy waste.
Customer Case
The Factory
Packaging & Shipping
