Wood Veneer Drying
The electricity consumption of the shine veneer dryer has been reduced by 35%, and you can visit the case site nearby.
Type: Roller Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 48m
Drying capacity (m³/day) : 80
Heat Source: Biomass Burner (Other options available)
24 hours online service（WhatsApp：15806625431）
Wood Veneer Drying
Shine wood veneer drying provides you with a one-stop solution. The dried veneer has uniform moisture content, is flat, has no wrinkles or end ripples, no cracks, and has a good surface glued state. The power of the whole machine is reduced by 35%, and the power consumption is greatly reduced compared with the traditional veneer dryer.
Advantages of Wood Veneer Drying
1、The hot air fan and cold air fan of the dryer adopt the latest axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the later operation cost.
2、The Shine heat exchanger adopts step-by-step heat exchange. The specifications of each heat exchanger are different, and the hot air inside can be evenly distributed to the single board. After drying, the moisture content of the veneer is uniform, smooth, without wrinkles or end ripples, without cracks, and the surface is in good glued state.
3、The roller veneer dryer adopts frequency conversion speed regulation, which can adjust the feeding speed according to your veneer thickness and moisture content, so as to achieve the ideal drying effect.
4、The fuel source can be waste wood or bark after peeling, which can greatly reduce fuel costs for users.
5、Perfect after-sales service system, 24-hour online service, remote operation, so that customers can rest assured after installation. Regular follow-up services for old customers, sufficient and timely supply of spare parts.
Product Parameter of Wood Veneer Drying
Model No | GTH30-52 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 48m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 80cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（12pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
6 ton biomass burner | Power: 16.5KW |
Total power | 125KW |
Actual electricity consumption | About 87.5kwh per hour |
Covered Space of the whole machine | 58M X 9M X 3M |
Customer Case
Certification
The Factory
Packaging & Shipping
