Veneer Dryer Technology
A veneer dryer is one of the main types of equipment in the plywood production line. Shine veneer dryer technology can make the veneer be of consistent moisture which gives the plywood better bonding properties, thus making it stronger. One of the outstanding features of Shine Veneer Roller Dryer is saving dry costs mostly for plywood factories. The composite cost of drying the veneer is only about $12 per cubic meter because the biomass burner can provide hot air to burn all kinds of waste wood directly. Good quality wood veneer dryer directly produces the best quality of veneer and glued products.
Veneer Dryer Technology
Veneer dryer technology is designed to dry core dry press plywood, hardwood veneer plywood and other plywood with the jet box and the pressing feed rolls. Our brand veneer dryer has always been famous for producing high quality veneer with uniform dry moisture content. Dryer is based on the heat exchange principle, using the heat generated by the power supply for heating. It is the heat cycle generated by the continuous suction of the exhaust fan.The whole machine can be divided into two parts: heating section and cooling section. We also can do other type veneer dryer such as 1 Deck Veneer Dryer. Face Veneer Dryer ,Core Veneer Dryer, Automatic Veneer Feeder , 3 Deck Veneer Dryer ,2 Deck Veneer Dryer. We can design the veneer dryer according to the needs of our customers.
Main Features of Veneer Dryer Technology
1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2. The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect .
4. Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers' requirements.
5. Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.
6. The fuel source can be the waste wood after peeling or the tree bark ,which can reduce the fuel cost greatly for the user.
Product Parameter of Veneer Dryer Technology
Model No | GTH30-44 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 40m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 60-70cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（10pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
6 ton biomass burner | Power: 16.5KW |
Total power | 114KW |
Actual electricity consumption | About 80kwh per hour |
Covered Space of the whole machine | 50M X 9M X 3M |
Customer Case
Certification
The Factory
Our Services
Pre-sale services:
1) Provide the free consultation of all veneer production line
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory.
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
After sale services:
1) 24 hours online service.
2) Provide the VIDEO with Install and debug the equipment.
3) Provide technical exchanging（Technical phone：+8615806625431）Door to door service is possible.
