Low Cost Veneer Dryer Machine
Type: Roller Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 32m
Drying capacity (m³/day) : 50-60
Heat Source: Biomass Burner (Other options available)
24 hours online service（WhatsApp：15806625431）
Low Cost Veneer Dryer Machine
The daily output of this 2 deck 36m roller veneer dryer can reach 50-60m³/24h. It can dry different wood species and moisture content according to your needs. Fresh veneer can be dried to 0, and the drying effect is good, low cost. According to the needs of different customers, we can customize the equipment suitable for you. There is no need to worry about the installation problem. There will be a dedicated engineer to go to the installation. If you can’t get to the site for various reasons, you can also guide the installation through video. There is no need to worry about after-sales service. Shine guarantees your satisfaction, choose Shine veneer dryer, a one-stop solution, to make your veneer more perfect.
If you also need plywood and other related machines, Shine will also provide them, looking forward to your contact us!
Advantages of Veneer Dryer Machine
1、The hot air fan and cold air fan of the dryer adopt the latest axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the later operation cost.
2、The Shine heat exchanger adopts step-by-step heat exchange. The specifications of each heat exchanger are different, and the hot air inside can be evenly distributed to the single board. After drying, the moisture content of the veneer is uniform, smooth, without wrinkles or end ripples, without cracks, and the surface is in good glued state.
3、The roller veneer dryer adopts frequency conversion speed regulation, which can adjust the feeding speed according to your veneer thickness and moisture content, so as to achieve the ideal drying effect.
4、The fuel source can be waste wood or bark after peeling, which can greatly reduce fuel costs for users.
5、Perfect after-sales service system, 24-hour online service, remote operation, so that customers can rest assured after installation. Regular follow-up services for old customers, sufficient and timely supply of spare parts.
Product Parameters of Veneer Dryer Machine
Model No | GTH30-36 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 50-60cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（8pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 7.5KW（2pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 92KW |
Actual electricity consumption | About 65kwh per hour |
Covered Space of the whole machine | 42M X 9M X 3M |
Case Video of Veneer Dryer Machine
Our Factory
Certification
The customer evaluation
Our Services
Pre-sale services:
1) Provide the free consultation of all plywood machinery
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging（Technical phone：++8615806625431）Door to door service is possible
