4 deck roller veneer dryer
1.support ODM/OEM
2.Stable equipment and low failure rate
3.Highly automated and efficient (fully automatic veneer feeding and receiving system)
4.Professional factory production
5.The main electrical components are all well-known domestic and foreign brands
Shine veneer dryer can dry 0.8-8mm veneer.The veneer after drying by Shine wood veneer dryer is smooth and the moisture content is uniform, and the surface is in good condition for gluing. Veneer roller dryer with highly heat efficiency and the heat loss is small.The most merits of veneer drying machine is that reduce cost greatly.
Advantages of Veneer Dryer Machine
1. The biomass burner can directly use crushed wood waste as fuel to provide a heat source for the dryer, which is energy-saving and environmentally friendly, and greatly reduces the drying cost.
2. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
3. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
4. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
5. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
6. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
7. We have a professional R&D team which can design different models according to customer’s special requirement.
8. The perfect after-sale service team can supply 24 hours online service.
Product Parameters of Roller Veneer Dryer
Model No | GTH30-28 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 24m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 80-85 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（24pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 11KW（1pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 161.5KW |
Actual electricity consumption | About 114kwh per hour |
Customer Case
The Factory
Packaging & Shipping
