Core Veneer Dyer
Type: Roller Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 28m
Drying capacity (m³/day) : 35
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
Core Veneer Dyer
Shine core veneer dryer is a very important machine in the plywood making process. The moisture content after veneer drying is uniform and veneers are in good condition before gluing. The veneer dried by roller dryer is flat, no buckle or end waviness. Shine biomass veneer dryer is widely valued for the lowest operation cost, high drying capacity, and energy-efficient as well as high-quality veneer output.
Advantages of Core Veneer Dyer
1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2. The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect .
3. Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers' requirements.
4. Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.
5. The fuel source can be the waste wood after peeling or the tree bark ,which can reduce the fuel cost greatly for the user.
Product Parameter of Core Veneer Dyer
Model No | GTH30-28 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 24m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 35-40cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（6pc） |
Traction motor | Power: 5.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 7.5KW（1pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 73.5KW |
Actual electricity consumption | About 52kwh per hour |
Covered Space of the whole machine | 34M X 9M X 3M |
Customer Case
Exhibition
The Factory
Packaging & Shipping
